Model compatibility has not been independently verified
Earlier archive data contained suggested model or series names. Without a clear model/code table in a manufacturer manual, these names are no longer displayed as verified matches.
This is general brand/device guidance; check the model label and official manual.
Open manufacturer sourceWhat does this code mean?
The appliance may have detected leakage or activated its water-safety system.
Source scope: Compatibility with specific model numbers has not been established. Always check your exact appliance manual.
Documented model/series: KCMI 98142 WIFI / KCMI 98142 G WIFI. Evidence: Kılavuz PDF s. 41 (basılı s. 38), arıza uyarıları. Codes can mean different things on other models. This does not establish a failed part.
Open manufacturer sourceWhat can you try?
- 01
Identify the exact code and model
Photograph the Vestel display showing E04 and the product model label. The cited manufacturer evidence covers: KCMI 98142 WIFI / KCMI 98142 G WIFI. Do not assume other models use the same code meaning.
What the result means: If your model differs, consult its specific manual before acting on the guidance.
- 02
Do not force operation during overfill protection
Vestel states the machine may drain excess water automatically. Avoid restarting; close the inlet tap if water escapes and it is safe to do so.
What the result means: Water near electrical connections is a reason to stop.
- 03
Shut down and request support
After the machine has completed its safety drain, switch off and unplug only if safe, then contact service.
What the result means: An overfill code alone does not identify the failed part.
Stop immediately for leaks, smoke, burning smell or electrical danger. For gas leaks, leave the area and call local emergency services.
How do you actually fix this?
Start with safe checks. Some codes have no safe home fix; in that case we explain what the professional repair actually involves.
Practical fixes you can try
- Stop the appliance and close its water tap if the level is too high. Avoid any electrical connection on a wet floor.
- Only use an official model-approved drain/cancel procedure when conditions are dry and safe. Do not force a pump to run.
- Do not add detergent if foaming is present. If filling continues despite a closed command, stop use.
If it persists, how is it actually repaired?
A technician checks whether the inlet valve leaks when closed and whether water-level sensors and control signals work; only the proven faulty component is repaired.
How do you know it is fixed? The next monitored cycle must fill without overflowing or repeating a flood warning.
Safety and warranty: Warranty terms depend on manufacturer, model and local law. Damage caused by unauthorised disassembly or improper repair may be excluded. Live electrical work, gas, refrigerant circuits and sealed cabinets require qualified professionals; this is not a DIY instruction for those tasks.
Evidence: The manufacturer link above supports the broad code meaning. The repair pathway is a general technical diagnostic explanation, not a confirmed failed-part diagnosis for every model.
Manufacturer source
Independent safety-focused explanation with a manufacturer link. Possible causes are not verified part diagnoses; the code may vary by model or region.
Open original manufacturer guidance ↗