Model compatibility has not been independently verified
Earlier archive data contained suggested model or series names. Without a clear model/code table in a manufacturer manual, these names are no longer displayed as verified matches.
This is general brand/device guidance; check the model label and official manual.
Open manufacturer sourceWhat does this code mean?
On relevant Electrolux oven models, F131 indicates magnetron sensor temperature too high. This meaning is limited to the product family covered by the linked manufacturer document; it does not prove which part has failed.
Documented for: Electrolux kompakt fırın ve mikrodalga fonksiyonlu ilgili modeller. Check your exact model and service manual; the same code may differ by model.
Read official manufacturer referenceWhat can you try safely?
Only follow steps approved for your specific model; stop if the fault indicates an unsafe condition.
- 01
Confirm model and error
Photograph F131 and check the exact model label. The linked manufacturer reference is specific to Electrolux kompakt fırın ve mikrodalga fonksiyonlu ilgili modeller.
How to interpret the result: The precise model is essential.
- 02
Safe user check 1
Switch the oven off and allow it to cool fully; check only external ventilation clearances.
How to interpret the result: Observe the result without opening internal assemblies.
- 03
Safe user check 2
If safe and allowed by your model manual, try one normal restart, without touching hot or internal components.
How to interpret the result: Observe the result without opening internal assemblies.
- 04
Safe user check 3
If the code recurs, stop unsafe operation and give the exact model, code and observed conditions to qualified service; ask what diagnostic test supports any repair.
How to interpret the result: Observe the result without opening internal assemblies.
How is the fault resolved?
User-accessible checks
- Switch the oven off and allow it to cool fully; check only external ventilation clearances.
- If safe and allowed by your model manual, try one normal restart, without touching hot or internal components.
- If the code recurs, stop unsafe operation and give the exact model, code and observed conditions to qualified service; ask what diagnostic test supports any repair.
Professional diagnosis and repair
A qualified technician evaluates controller temperature, cooling airflow and relevant sensors.
How to verify success: The error should no longer recur during normal operation. If it does, stop repeated attempts and request model-specific help.
Important: Never open electrical, hot, refrigerant or microwave assemblies. Unauthorized work may affect warranty rights depending on local law.
Why can this happen?
On relevant Electrolux oven models, F131 indicates magnetron sensor temperature too high. This meaning is limited to the product family covered by the linked manufacturer document; it does not prove which part has failed.
- Manufacturer identifies a system condition, not necessarily a failed part.
- Model and operating circumstances affect the cause and proper repair.
Is this code valid for your appliance?
Documented for: Electrolux kompakt fırın ve mikrodalga fonksiyonlu ilgili modeller. Check your exact model and service manual; the same code may differ by model.