Model compatibility has not been independently verified
Earlier archive data contained suggested model or series names. Without a clear model/code table in a manufacturer manual, these names are no longer displayed as verified matches.
This is general brand/device guidance; check the model label and official manual.
Open manufacturer sourceWhat does this code mean?
The appliance may have detected leakage or activated its water-safety system.
Source scope: Compatibility with specific model numbers has not been established. Always check your exact appliance manual.
Documented model/series: BM 6066 E9 (belgelenen model). Evidence: BM 6066 E9 kılavuzu basılı s. 29, su taşma / su kesik uyarıları. Codes can mean different things on other models. This does not establish a failed part.
Open manufacturer sourceWhat can you try?
- 01
Identify the exact code and model
Photograph the Beko display showing E:01 and the product model label. The cited manufacturer evidence covers: BM 6066 E9 (belgelenen model). Do not assume other models use the same code meaning.
What the result means: If your model differs, consult its specific manual before acting on the guidance.
- 02
Respond to an overflow warning
Beko says E:01 may flash when too much water or a leak is detected. Stop use and shut the water tap if safely accessible; do not touch wet electrical connections.
What the result means: If the alert persists, contact service.
- 03
Escalate if the code persists
Give authorised support the exact code, model number and when it appeared. Do not open electrical control boards, valves, fan housings, compressor systems or refrigerant pipes.
What the result means: A code description alone does not prove which component must be replaced.
Stop immediately for leaks, smoke, burning smell or electrical danger. For gas leaks, leave the area and call local emergency services.
How do you actually fix this?
Start with safe checks. Some codes have no safe home fix; in that case we explain what the professional repair actually involves.
Practical fixes you can try
- Stop the cycle and close the water valve. If the floor is wet, do not touch plugs or electrical controls in the wet area.
- Visually inspect accessible hoses, tap joints and door seals. Remove trapped laundry or debris only when the appliance is completely safe to handle.
- Never tilt the appliance to clear a base-pan leak warning. Do not restart while a leak or overflow is unresolved.
If it persists, how is it actually repaired?
A technician traces the real leak and checks hoses, seals, pump housing, valves or level control. The cause must be fixed and leak-tested rather than merely clearing the warning sensor.
How do you know it is fixed? On controlled testing there should be no new dripping and filling/draining should be normal. Stop at the first leak.
Safety and warranty: Warranty terms depend on manufacturer, model and local law. Damage caused by unauthorised disassembly or improper repair may be excluded. Live electrical work, gas, refrigerant circuits and sealed cabinets require qualified professionals; this is not a DIY instruction for those tasks.
Evidence: The manufacturer link above supports the broad code meaning. The repair pathway is a general technical diagnostic explanation, not a confirmed failed-part diagnosis for every model.
Manufacturer source
Independent safety-focused explanation with a manufacturer link. Possible causes are not verified part diagnoses; the code may vary by model or region.
Open original manufacturer guidance ↗