No verified model list is available for this code
A manufacturer code/support source may be available, but no exact supported model has been documented for this record. Do not treat the code as a model-specific diagnosis without checking the manual.
Verify the full model number against the manufacturer manual.
Open manufacturer sourceWhat does this code mean?
AquaStop water protection. The exact model manual determines applicability; a fault code alone does not prove a particular component is defective.
Source scope: Compatibility with specific model numbers has not been established. Always check your exact appliance manual.
The manufacturer lists this code and general meaning; compatibility with your exact model has not been verified. Follow your model manual.
Open manufacturer sourceWhat can you try?
- 01
Record the exact code and when it appeared
Note every letter and digit, the stage of the cycle and the full model label. Error meanings can vary between models.
What the result means: This prevents applying guidance for a different model or a similar-looking code.
- 02
Stop the water and electrical hazard first
Close the water inlet only if it is safely accessible. Do not touch plugs or sockets near standing water; isolate power from a safe dry location or seek help.
What the result means: Do not restart a leaking machine. Drying the floor does not fix the cause.
- 03
Document visible signs of leakage
Without running or dismantling the unit, look for wet floor areas, residue around the door, hose damage and excess foam. Do not remove built-in panels.
What the result means: Photos and the leak location help service assess the cause.
- 04
Prepare precise notes for the technician
Provide the code, model number, stage of the program, sounds and any leak. Avoid opening a warranty-covered appliance or authorizing replacements without diagnosis.
What the result means: A technician can test components rather than guessing from the code.
Stop immediately for leaks, smoke, burning smell or electrical danger. For gas leaks, leave the area and call local emergency services.
How do you actually fix this?
Start with safe checks. Some codes have no safe home fix; in that case we explain what the professional repair actually involves.
Practical fixes you can try
- Stop the cycle and close the water valve. If the floor is wet, do not touch plugs or electrical controls in the wet area.
- Visually inspect accessible hoses, tap joints and door seals. Remove trapped laundry or debris only when the appliance is completely safe to handle.
- Never tilt the appliance to clear a base-pan leak warning. Do not restart while a leak or overflow is unresolved.
If it persists, how is it actually repaired?
A technician traces the real leak and checks hoses, seals, pump housing, valves or level control. The cause must be fixed and leak-tested rather than merely clearing the warning sensor.
How do you know it is fixed? On controlled testing there should be no new dripping and filling/draining should be normal. Stop at the first leak.
Safety and warranty: Warranty terms depend on manufacturer, model and local law. Damage caused by unauthorised disassembly or improper repair may be excluded. Live electrical work, gas, refrigerant circuits and sealed cabinets require qualified professionals; this is not a DIY instruction for those tasks.
Evidence: The manufacturer link above supports the broad code meaning. The repair pathway is a general technical diagnostic explanation, not a confirmed failed-part diagnosis for every model.
Manufacturer source
Independent safety-focused explanation with a manufacturer link. Possible causes are not verified part diagnoses; the code may vary by model or region.
Open original manufacturer guidance ↗